差異處
這裏顯示兩個版本的差異處。
| 兩邊的前次修訂版 前次修改 下次修改 | 前次修改 | ||
| tech:debian_net_tips [2022/01/23 20:08] – jonathan | tech:debian_net_tips [2022/01/23 21:38] (目前版本) – jonathan | ||
|---|---|---|---|
| 行 38: | 行 38: | ||
| } | } | ||
| </ | </ | ||
| - | - 啟動 wpa_supplicant 服務與驗證是否正常連上 WiFi AP<cli> | + | |
| + | : | ||
| + | auto wlp0s20f3 | ||
| + | iface wlp0s20f3 inet dhcp | ||
| + | pre-up wpa_supplicant -B -Dwext -iwlp0s20f3 -c/ | ||
| + | post-down killall -q wpa_supplicant | ||
| + | : | ||
| + | </ | ||
| + | | ||
| systemctl restart wpa_supplicant | systemctl restart wpa_supplicant | ||
| + | </ | ||
| + | - 重啟網路服務< | ||
| + | systemctl restart networking.service | ||
| + | </ | ||
| + | - 驗證是否正常連上 WiFi AP< | ||
| wpa_cli -i wlp0s20f3 status | wpa_cli -i wlp0s20f3 status | ||
| - | </ | + | </ |
| root@nuc:~# wpa_cli -i wlp0s20f3 status | root@nuc:~# wpa_cli -i wlp0s20f3 status | ||
| bssid=28: | bssid=28: | ||
| 行 56: | 行 69: | ||
| address=04: | address=04: | ||
| uuid=14ea0bcc-c7f5-592c-ba49-159bbe31e49d | uuid=14ea0bcc-c7f5-592c-ba49-159bbe31e49d | ||
| - | </ | ||
| - | - 編輯 interfaces 網路介面設定< | ||
| - | : | ||
| - | auto wlp0s20f3 | ||
| - | iface wlp0s20f3 inet dhcp | ||
| - | pre-up wpa_supplicant -B -Dwext -iwlp0s20f3 -c/ | ||
| - | post-down killall -q wpa_supplicant | ||
| - | : | ||
| - | </ | ||
| - | - 使用 ifup 啟動 wifi 網卡, 指令類似以下< | ||
| - | systemctl restart wpa_supplicant | ||
| - | ifup wlp0s20f3 | ||
| - | </ | ||
| - | systemctl restart networking.service | ||
| </ | </ | ||
| - 使用 ip addr show wlp0s20f3 就可看到目前的設定< | - 使用 ip addr show wlp0s20f3 就可看到目前的設定< | ||
| 行 93: | 行 92: | ||
| </ | </ | ||
| </ | </ | ||
| + | |||
| + | <WRAP center round alert 60%> | ||
| + | **針對在 PVE 環境將 WiFi 網卡加入 Bridge 並沒有設定成功** | ||
| + | * 目前似乎是 **bridging does not work with WiFi** (主要是 VM 要使用 WiFi Bridge 的問題) | ||
| + | * 找尋的相關資料如下: | ||
| + | * https:// | ||
| + | * https:// | ||
| + | * https:// | ||
| + | * https:// | ||
| + | * https:// | ||
| + | </ | ||
| ===== 參考網址 ===== | ===== 參考網址 ===== | ||