差異處
這裏顯示兩個版本的差異處。
| tech:mkfs3t [2014/02/06 00:49] – 建立 jonathan | tech:mkfs3t [2018/06/24 08:34] (目前版本) – Jonathan Tsai | ||
|---|---|---|---|
| 行 1: | 行 1: | ||
| + | ====== CentOS 超過 3T 硬碟的格式化 ====== | ||
| + | 使用 fdisk 對 3T 以上硬碟格式化後, | ||
| + | * 安裝 gparted <code sh> | ||
| + | yum install gparted | ||
| + | </ | ||
| + | |||
| + | * 確認新安裝硬碟的位置 <code sh> | ||
| + | vi / | ||
| + | </ | ||
| + | : | ||
| + | Feb 5 23:48:27 xpc-sh67-i7 kernel: sd 14:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16). | ||
| + | Feb 5 23:48:27 xpc-sh67-i7 kernel: sd 14:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) | ||
| + | Feb 5 23:48:27 xpc-sh67-i7 kernel: sd 14:0:0:0: [sdc] Test WP failed, assume Write Enabled | ||
| + | : | ||
| + | </ | ||
| + | * 開始建立磁區分割 <code sh> | ||
| + | parted /dev/sdc | ||
| + | |||
| + | (parted)mklabel gpt | ||
| + | (parted)unit TB | ||
| + | (parted)mkpart primary 0.00TB 3.00TB | ||
| + | </ | ||
| + | * 確認是否完成建立 <code sh> | ||
| + | (parted)print | ||
| + | </ | ||
| + | Model: Archgon MH-3507I-U3 (scsi) | ||
| + | 磁碟 / | ||
| + | 磁區大小 (邏輯/ | ||
| + | 分割區：gpt | ||
| + | |||
| + | 編號 | ||
| + | | ||
| + | </ | ||
| + | (parted) quit | ||
| + | </ | ||
| + | * 開始格式化 <code sh> | ||
| + | mkfs -t ext4 /dev/sdc1 | ||
| + | </ | ||
| + | * 掛載上 /data <code sh> | ||
| + | mount /dev/sdc1 /data | ||
| + | df -k | ||
| + | </ | ||
| + | : | ||
| + | / | ||
| + | : | ||
| + | </ | ||
| + | |||
| + | |||
| + | ===== 參考網址 ===== | ||
| + | * http:// | ||
| + | |||
| + | {{tag> | ||